We now have a refrigeration consultant employed to answer all your enquiry’s. If you are looking for independent advice from an expert on refrigeration, contact the hotline on 087-9508660.
We now have a refrigeration consultant employed to answer all your enquiry’s. If you are looking for independent advice from an expert on refrigeration, contact the hotline on 087-9508660.
We now stock new and second hand refrigeration cabinets, chefs tables, bottle coolers, single and double door chill and freezer units.
If you are looking for any type of refrigeration equipment new or second hand give the hotline a ring on 087-9508660.
My question involves traps that must be installed for proper oil return when the condenser is much higher than the AHU [air-handling unit]. I have been taught in college to trap every 20 feet of height. Manufacturer reps have also instructed me that if the install is correct, then you do not need the traps. Can you solve this once and for all please!!!
Maintenance tips for the efficient running of cold room / freezer rooms:
You have to keep the evaporator and condenser and coils (and filters, if installed) clean, and make sure the fan blades are clean, and the right size, to maintain proper air flow.
When air flow through either the evaporator or condenser is restricted, efficiency decreases, and electrical energy consumption increases.
If the condenser coils gets dirty enough, the compressor discharge pressures can get high enough to damage the compressor.
If you think you have a cold room / freezer room problem ring the hotline on 087-9508660 to get it sorted.
Increase Ice Production By Lowering the Ambient Air Temperature
The biggest effect you can have on your restaurant/bar ice machines production is to keep it in a cool place. Most kitchens are not cool in the summer. Every degree the temperature rises is a decrease in production. Is relocation an option?
Increase Ice Production By Keeping the Condenser Coils Clean
Dirty condenser coils have the same effect as the machine being in an ambient temperature that is too high. In addition to decreasing production, it also decreases the life of the compressor. Grease is the biggest culprit. It will have to be professionally removed.
Cold Rooms and Freezer Rooms: We are delighted to be able to supply a new range of cold room to the market. Our cold rooms are easily erected and come with pre charged lines, units and controllers are pre wired also. All this means big savings for you the customer. Cold rooms and freezer rooms are up to safety regulations and come with a guarantee.
Ring the hot line for a free cold room quotation 087-9508660.
There is a bit of debate going on between engineers at the moment regarding commercial mineral and beer cabinets. Is it more efficient to switch the cabinets off over night or to higher up the set temperature by one or to degrees. Which one do you think work best and do you have any proof ? Do you have any better ideas on how to save on running costs ?
By having your refrigeration maintained by a professional engineer you can reduce your running costs and prolong the life span of your equipment. Remember your refrigeration plant is more than likely very expensive and it should be maintained properly.
Ring the Hotline to get some energy saving tips and reduce your electricty bill.
If you have a story or even better a picture of a bad install let us know. No company names necessary. We don’t want to embarrass anyone !! Just a bit of fun.
Start energy saving and cut down on your refrigeration electricity bill by following these steps.
1 . Don’t set temperatures lower than what is required. As a rough guide, one degree higher equates to a 3% saving.
2 . Electronic expansion valves on refrigeration vehicles allows the refrigeration match the load on the vehicle.
3 . Don’t stack boxes in front of vents and fans.
4 . Are your condensers clean? Clean condensers are more efficient.
5 . Check that the refrigerant is charged with no leakage.
6 . Think of upgrading old equipment. Big advances have been made over the past number of years and you can make big energy cost savings with energy efficient refrigeration models.
